手腕卡

手腕帶卡由100%硅膠一次性成型，采用閉環式腕帶，表芯使用PVC熱層壓工藝生產（表芯PVC圓片卡為Φ30直徑），表帶使用高周波二次注塑封裝，芯片可封裝高頻或低頻芯片，厚度為1.0mm。手腕帶卡可反復擦寫100000次，可存儲512字節內容，讀距達50cm（讀頭不同有差異），有黑色、紅色、白色、藍色等顏色(批量可定制)?，F廣泛應用于游泳場、洗浴中心、野外作業等潮濕高溫惡劣環境。手腕帶卡質地柔軟、抗撕裂、防水；無腐蝕性，并且彈性好；可根據市場片材供應顏色而選用；安裝RFID后，可作查詢跟蹤。

Wrist strap card consists of 100% silicone one-time molding, using closed loop wrist strap, table core using PVC thermal lamination process production (Table core PVC wafer card is Phi 30 diameter), strap using high frequency injection of two package, chip package high frequency or low frequency chip, the thickness of 1.0mm. Wrist strap card can be repeatedly erased 100000 times, can store 512 bytes read content, up to a distance of 50cm (read head of different difference), black, red, white, blue and other colors (mass customization). Is now widely used in swimming pool, bath center, the field operation of wet high temperature harsh environment. Wrist strap card texture soft, tear resistant, waterproof; non corrosive, and good elasticity; according to the market supply and the selection of color sheet; after the installation of RFID, can be used for tracking.